COPIED
5 mins

THE MASTER OF TRANSFORMATION

Mark Camoccio puts this new Turkish CO2 dual-format airgun through its paces and discovers a versatile piece of kit worth further investigation

The new Reximex Morpho is so easy to handle, and properly accurate

Turkish-based Reximex has won many fans with its exciting range of PCPs over the last decade or so, and the combination of modern styling, eye-catching features and value for money has put them firmly on the map.

On test here is the Reximex Morpho, and this neat design is a departure and a landmark for the brand, as it’s the brand’s first CO2 powered airgun. Available in .177 as per our test, or .22, it’s a multi-shot recoilless model, with plenty of versatility built-in. Open the box, and alongside the pistol, there’s a Silent Force Sound Moderator, two magazines, a single-shot tray, spare seals, instructions and Allen keys. But where things really start to get interesting is with the inclusion of a quick detachable shoulder stock. So yes, effectively the Morpho is two guns in one.

Power comes from one 12g co2 capsule

All the metalwork gets a practical matt black finish, and contrasting with the synthetic stock elements, the overall impression is of a robust workhorse of a pistol. Maybe not the most sophisticated, but well made, well presented and a whole box of tricks for the money.

CO2 STORAGE AND HANDLING

Up front, the Morpho’s slimline cylinder is where the CO2 is stored, with the tensioning cap knurled for grip. As for the stubby, free-floating barrel above, this finishes in that foresight assembly. Loading a standard CO2 capsule into place is easy, just unscrew the knurled tension cap and drop a 12g capsule neck-first into the chamber. Return the cap and hand tighten until you hear a hiss of gas or when it stops turning.

As mentioned, we get two cassette-style magazines with this pistol, and to fill a magazine, just wind the clear cover right round, anti-clockwise, until it stops; then, while holding the drum, insert the first pellet, which holds the drum. All chambers can then be filled. Pull back the side-lever, and slide the mag into its slot from the right. Locating a magazine proved a bit sticky initially, but with use, things became much smoother.

Shooting first as a straight pistol, those ambidextrous, fully contoured target grips feel great in the aim, even incorporating a palm shelf. The fibre optics offer a really vibrant sight picture - with that foresight red element set within the green dots of the rearsight. There is a gap between post and notch, and I found a full arms length aim was needed to maximise the potential. OK, so the sights are non adjustable, but that really doesn’t matter with this type of pistol, with the art of ‘aiming off’ a skill to learn in itself.

QUICK ASSEMBLY

Firstly, snapping the shoulder stock into place couldn’t be easier. Simply line up the top and bottom of the stock with the rear holes in the pistol body, then one smart jolt from the rear and it clicks into place. The solid rubber pad comes with plenty of grip, so hugs the shoulder in the aim. It’s stylish too, with a comfortable moulded cheekpiece all part of the design, and it works well.

It seems a shame not to fit the silencer that comes supplied (not that the Morpho is noisy), and again, it’s a very easy process, given the 1/2inch UNF thread under the muzzle collar. So just unscrew the cap and spin the silencer into position. The Silent Force sound moderator adds five inches (127mm) to the overall length, but the visuals are enhanced for sure, along with welcome front weight. It’s deathly silent too.

With silencer and rear stock in place, the Morpho feels like a completely different prospect, a super compact mini rifle, and it’s just great to have this versatility. Those dovetail rails mean a small pistol scope or red dot can be utilised, and while the cheekpiece may look a tad low in this scenario, (padding up the cheek section would be an easy task if necessary), I had no such problem on test, with the Morpho feeling natural in the aim.

To detach the rear stock from the pistol, just press the spring loaded button on the stock and pull rearwards. On test, the bottom protrusion proved a little stubborn, but it soon shifted with some wiggling, and again, eased with use. Low power keeps everything legal in pistol format too, so no concerns on that score.

PERFORMANCE

Cycling shots is fairly civilised, and the side-lever takes little effort to index shots in turn. As for the trigger, yes it creeps, but it’s nicely shaped with a broad blade and a relatively light release.

CO2 is all about ease of use and lightweight actions, and ultra consistency is never the raison d’etre. That said, on test, this Morpho gave a very respectable account of itself. Over the chronograph the first 45 shots recorded a total velocity spread of just 32fps, with 50-odd shots possible, before power began to slide away. The usual caveat with CO2 is that performance can change when temperature changes, so expect less shots if out shooting in extreme cold for example. Talking of which, be careful on removing spent capsules, as a quirk of CO2 sees them become literally freezing to the touch when at the end of their run, and residual gas is escaping!

As for accuracy, initially over 10 yards, using open sights, and aiming as a rifle, I achieved easy half inch groups. Holding the Morpho at full arms length rested, just to get the best sight picture, closed these to 3/8inch. However, fitting a 2x pistol scope, and moving back to 20 yards, I achieved the same keyholes, which is pretty impressive accuracy from such a compact little CO2 model.

IN SUMMARY

The new Reximex Morpho is indeed a neat box of tricks and very much two guns in one. Its obvious rival is the similarly presented SMK CP2. However, the Morpho has plenty going for it. Single, shot or magazine? Open sights or scope/ red dot? Pistol or rifle? You decide on the day. In short the Morpho is great fun, properly accurate, easy to use, and wonderfully versatile.

GET IN TOUCH

01423 881919

range-right.co.uk

This article appears in Jun-26

Go to Page View
This article appears in...
Jun-26
Go to Page View
LICENSING DELAYS CONTINUE ACROSS POLICE FORCES, NEW FIGURES SHOW
New figures released by the National Police Chiefs’ Council (NPCC) have revealed that fewer than half of police forces in England and Wales are meeting firearms licensing turnaround targets.
HOME OFFICE CONFIRMS FURTHER FEES
The Home Office has confirmed that firearms licensing
RETAILERS URGED TO ADVISE CUSTOMERS ON UPDATED CL55
Firearms retailers are being encouraged to ensure customers
WEST MERCIA DROPS SECTION 1 SHOTGUN STANCE
An intervention by BASC and the National Gamekeepers’
VOICES OF THE GTA
Paul Green discusses RFD training, dealer support and
IMMERSIVE OPTICS
Vlad J Dasiukevich discusses UK manufacturing investment, practical
LEGAL LANDSCAPE
Laura Saunsbury highlights the importance of documenting communications
PRESERVING STANDARDS
Bill Blacker discusses certification, craftsmanship and protecting traditional
AWARD-WINNING SG
Gary Lamburn on dealer support, product development and
MORE THAN A ONE-OFF INCREASE
Barely a year after the major firearms licensing
THE NEWS IN NUMBERS
3 percent increase in firearms licensing fees announced
HOME OFFICE CONFIRMS FURTHER FIREARMS LICENSING FEE INCREASES FROM JUNE
The Home Office has confirmed that firearms licensing
SOUND MODERATOR DEREGULATION RECEIVES ROYAL ASSENT
Legislation containing provisions to deregulate sound moderators has
RETAILERS URGED TO ADVISE CUSTOMERS ON UPDATED CL55 NIGHT SHOOTING RULES
Firearms retailers are being encouraged to ensure customers
NEW EDGEHILL SHOOTING GROUND OWNER ADDRESSES ALCOHOL LICENCE CONCERNS
The new owner of a countryside shooting range
GUNMAKER SAM GARFIELD RECEIVES LADY MAYOR’S LIVERY APPRENTICE AWARD
Sam Garfield, a gunmaker at T.R. White &
RESTORE BRITAIN OPPOSES LABOUR SHOTGUN LICENSING PLANS
A new political party has added its voice
GTA CONFIRMS 2026 RFD COURSE DATES
The Gun Trade Association (GTA) has confirmed the
JONATHAN MCGEE SECURES UK DISTRIBUTION FOR COSMI
Jonathan McGee (centre), trading under his own name,
FIOCCHI CELEBRATIONS
Fiocchi reflects on 150 years of manufacturing, innovation
WEST MERCIA DROPS SECTION 1 SHOTGUN STANCE
An intervention by BASC and the National Gamekeepers’
PAUL GREEN ON THE PRESSURES FACING TODAY’S FIREARMS TRADE
From running the GTA’s RFD training courses to supporting dealers through complex licensing and explosives legislation, GTA technical director Paul Green is one of the most recognisable figures in the UK firearms trade. In the first instalment of GTI’s new GTA Voices series, he discusses his background, the challenges facing dealers and why preparation and training matter more than ever.
ANNOUNCING THE DRS MKII
FX Airguns has unveiled the new FX DRS MK2, an evolution of one of the most disruptive and successful PCP air rifles in recent years — and a model already regarded by many shooters as one of the finest-performing airguns on the market.
FIOCCHI FOCUSES ON INNOVATION AND RETAILER SUPPORT AS IT MARKS 150 YEARS
As Fiocchi marks 150 years in business, the company reflects on its evolving global strategy, continued investment in innovation and ongoing support for distributors and retailers ahead of future market changes.
IMMERSIVE OPTICS EXPANDS UK MANUFACTURING AND INNOVATION FOCUS
Vlad J Dasiukevich discusses Immersive Optics’ transition from design consultancy to manufacturer, the company’s investment in UK production capabilities, and why practical product innovation continues to drive its expanding optics and accessories range.
THE BEGINNER’S CALIBRE MYTH
Why the rifle we put in a new shooter’s hands matters more than the number stamped on the box, writes Paul Bradley, ballistician and portfolio director at Hexagon Ammunition.
THE POWER OF THE WRITTEN WORD
Specialist firearms licensing solicitor Laura Saunsbury explains why it is vital to document your communications with your local firearms licensing department.
PRECISION ENGINEERING AND THE MODERN TRADE
Edward King, the managing director of Anglo Spanish Imports (ASI), discusses European craftsmanship, the UK’s demanding 12ft/lb limit, the world’s most technically advanced competition rifles and the one airgun every dealer should have on their rack right now
PRESERVING THE CRAFT
As chair of The Certification Panel of the The Worshipful Company of Gunmakers, Bill Blacker is helping to safeguard traditional British gunmaking skills for future generations. Speaking to Gun Trade Insider , the respected barrel maker discusses craftsmanship, certification, apprenticeships and why experience still matters in a modern manufacturing world.
SGC GROUP AND BENELLI BUILD MOMENTUM IN THE UK MARKET
Following its recognition as Benelli’s Best Sport Distributor 2025, SGC Group is continuing to expand the Italian manufacturer’s presence across the UK sporting market through dealer support, product development and investment in customer engagement.
MID-SEASON RESET ON THE SHOP FLOOR
In the first of our new Retail Edge series, Gun Trade Insider shares five practical tips each month to help retailers improve sales, margin and shop floor performance.
DT11 SUPERSPORT
The Beretta DT11 has long been one of the most dominant competition shotguns. Now, to celebrate its 500th year, Beretta has unveiled the limited-edition DT11 Supersport – prompting Lloyd Pattison to see whether these subtle updates elevate the legendary platform.
THE MASTER OF TRANSFORMATION
Mark Camoccio puts this new Turkish CO2 dual-format airgun through its paces and discovers a versatile piece of kit worth further investigation
INTERNATIONAL PERSPECTIVE
IN ASSOCIATION WITH IWA OUTDOORCLASSICS
MAINLAND EUROPE
CARACAL USA APPOINTS KOLBA AS EXCLUSIVE COMMERCIAL DISTRIBUTOR
DOWN UNDER
NSW GOVERNMENT ANNOUNCES $39.3 MILLION INVESTMENT IN FIREARMS
Looking for back issues?
Browse the Archive >

Previous Article Next Article
Jun-26
CONTENTS
Page 37
PAGE VIEW